MLA 100 V
The MLA 100 V is a 100W 12V amplifier perfectly suited for QRP radios with a transmit power of 5W. With a drive power of 5W, the amplifier achieves an output power of 100W on the bands from 160 to 10m, and with 8W drive 80W output on 6m. The MLA100 features 7 Low Pass Filters automatically inserted or manually selected from the front panel. It also features PIN diode RTX switching for use even in QSK. The MLA100 is protected from excessive antenna VSWR, Excessive input power overdrive and has a thermal shutdown if overheated. The V version comes with a 80mm fan mounted to the heatsink.
Technical Specifications :
- Frequency: 1.8—30 MHz & 50—54 MHz
- Power Supply: 13VDC+/- 1V 25A
- Input Current: 16 A max
- Input Power: 1-10W max (All modes)
- Output Power: 100W max HF 80W 6m
- Input VSWR: 1.1-1.8:1
- Fuse: 20A (Automotive)
- Dimensions:L 190W 190 H 83 mm
- Weight: 1.600 Kg
Attachments
Related products
The LA 250 V is a 200W 12V linear amplifier for use in the VHF 140 – 150 MHz, (2m), band, with an input power of 1 – 15 W. The LA 250 V has an illuminated LCD display where all the parameters of the apparatus are indicated. It also features protection for excessive antenna VSWR, excessive input power and over temperature. The V model features two 120mm cooling fans attached to the heatsink.
The KL 503 HD is a 12V linear amplifier for use in the frequency range 25 – 30 MHz, with a drive power of 1 to 35 W in all modes. The KL 503 HD features a six-position power selector via a a front panel knob and a RX preamplifier with electronic switching, which can be activated via a switch on the front panel.
The KL 503 is a 12V linear amplifier for use in the frequency range 25 – 30 MHz, with a drive power of 1 to 6 W in all modes. The KL 503 features a six-position power selector via a a front panel knob and a RX preamplifier with electronic switching, which can be activated via a switch on the front panel.
The KL 506 is a 230Wmax 12V linear amplifier for use in the 10m Amateur Band frequency, (or other HF bands with the use of a suitable Low Pass Filter). It requires a drive power of 1 to 10W in all modes. The KL 506 features a 26dB RX preamplifier with electronic switching, a three position RF Output power selector via a control on the front panel, and a connector for remote control. On the front panel there is also a LED wattmeter to indicate the output power.