KL 805
The KL 805 is a 24V linear amplifier for use in the frequency range 25 – 30 MHz, with a drive power of 1 to 15 W in all modes. The KL 805 has a RX preamplifier with electronic switching, a three-position power selector via a switch on the front, a connector for remote control, and three cooling fans. On the front there is also a LED wattmeter to indicate the output power.
Technical Specifications :
- Frequency: 25 – 30 MHz
- Power Supply: 22 – 30 Vdc ( 24 V )
- Input Current: 35A max
- Input Power: 1W – 15 W
- Output Power: 600W max
- Input VSWR: 1.1 – 1.5:1
- Mode : AM – FM – SSB – CW
- Fuse: 3x 12A Fast 5×20mm
- Dimensions: L 420 W 190 H 90 mm
- Weight : 3.390 Kg
Attachments
Related products
The KL 405 is a 180Wmax 12V linear amplifier for use on the 10m Amateur Band, (or other HF bands with the use of a suitable Low Pass Filter). It requires a drive power of 1 to 10W in all modes. The KL 405 features a six position output power selector via a front panel control and a RX preamplifier with electronic switching, which can be activated via a switch on the front panel. The V version comes with a 80mm heatsink mounted fan.
The BLA 600 is a 230Vac amplifier, (configurable also for 115 and 240 Vac), The BLA600 is a 500W solid state linear amplifier compatible with all modern transceivers. It features automatic band selection. HF & 6m coverage, 3 antenna outputs that can be assigned by the user to one or more bands. This amplifier features an illuminated display that shows the operating status, and two cooling fans located in the front of the amplifier.
The HLA 305 V is a 12V linear amplifier for use on all HF bands from 1.5 to 30 MHz, with a drive power of 1 – 10 W. The HLA 305 V is equipped with six Low Pass Filters , switched automatically by a microprocessor, or set manually using the front panel control. The HLA 305 V also has an illuminated LCD display and twin 120mm cooling fans mounted to the heatsink.
The KL 505 is a 230Wmax 12V linear amplifier for use on the 10m Amateur Band, (or other HF bands with the use of a suitable Low Pass Filter). It requires a drive power of 1 to 10W in all modes. The KL 505 features a six position output power selector via a front panel control and a RX preamplifier with electronic switching, which can be activated via a switch on the front panel.