KL 200
The KL 200 is a 12V linear amplifier for use in the frequency range 28 – 29.7 MHz, with a drive power of 1 to 5W in FM/AM mode, and 2.0 – 10W in SSB mode.
Technical Specifications :
- Frequency: 28 – 29.7 MHz
- Power Supply: 12 – 14 Vcc
- Input Current: 11A max
- Input Power: 1W – 5W / 2.0 – 10W SSB
- Output Power: 100W AM/ FM – 200W SSB
- Input VSWR: 1.1 – 1.5:1
- Mode AM – FM – SSB
- Fuse: 12A Fast 5×20mm
- Dimensions: L 125 W 120 H 40 mm
- Weight: 433 g
Attachments
Related products
The KL 505 is a 230Wmax 12V linear amplifier for use on the 10m Amateur Band, (or other HF bands with the use of a suitable Low Pass Filter). It requires a drive power of 1 to 10W in all modes. The KL 505 features a six position output power selector via a front panel control and a RX preamplifier with electronic switching, which can be activated via a switch on the front panel.
The MLA 100 is a 100W 12V amplifier perfectly suited for QRP radios with a transmit power of 5W. With a drive power of 5W, the amplifier achieves an output power of 100W on the bands from 160 to 10m, and with 8W drive 80W output on 6m. The MLA100 features 7 Low Pass Filters automatically inserted or manually selected from the front panel. It also features PIN diode RTX switching for use even in QSK. The MLA100 is protected from excessive antenna VSWR, Excessive input power overdrive and has a thermal shutdown if overheated.
The KL 805 is a 24V linear amplifier for use in the frequency range 25 – 30 MHz, with a drive power of 1 to 15 W in all modes. The KL 805 has a RX preamplifier with electronic switching, a three-position power selector via a switch on the front, a connector for remote control, and three cooling fans. On the front there is also a LED wattmeter to indicate the output power.
The KL 506 is a 230Wmax 12V linear amplifier for use in the 10m Amateur Band frequency, (or other HF bands with the use of a suitable Low Pass Filter). It requires a drive power of 1 to 10W in all modes. The KL 506 features a 26dB RX preamplifier with electronic switching, a three position RF Output power selector via a control on the front panel, and a connector for remote control. On the front panel there is also a LED wattmeter to indicate the output power.