AD – 203
AD 203 is a PCB Board which is installed in suitable radio transceivers to increase their power.
Check the information in the user manual for suitability.
User Manual
Attachments
Related products
The LA 144 is a 60W 12V linear amplifier for use in the VHF 135 – 175 MHz band, requiring an input power of 0.5 – 4 W maximum.
The BLA 600 is a 230Vac amplifier, (configurable also for 115 and 240 Vac), The BLA600 is a 500W solid state linear amplifier compatible with all modern transceivers. It features automatic band selection. HF & 6m coverage, 3 antenna outputs that can be assigned by the user to one or more bands. This amplifier features an illuminated display that shows the operating status, and two cooling fans located in the front of the amplifier.
The HLA 150 Black is a 150Wmax 12V linear amplifier for use on all HF bands from 1.8 to 30 MHz, with a drive power of 1 – 10 W. The HLA 150 Black features six Low Pass Filters , switched automatically by a microprocessor, or set manually using the front panel control. It also features an LED power meter, 3dB input attenuator and VOX or PTT input RTX control.
The KL 405 is a 180Wmax 12V linear amplifier for use on the 10m Amateur Band, (or other HF bands with the use of a suitable Low Pass Filter). It requires a drive power of 1 to 10W in all modes. The KL 405 features a six position output power selector via a front panel control and a RX preamplifier with electronic switching, which can be activated via a switch on the front panel. The V version comes with a 80mm heatsink mounted fan.