Filter
The KL 805 is a 24V linear amplifier for use in the frequency range 25 – 30 MHz, with a drive power of 1 to 15 W in all modes. The KL 805 has a RX preamplifier with electronic switching, a three-position power selector via a switch on the front, a connector for remote control, and three cooling fans. On the front there is also a LED wattmeter to indicate the output power.
The BLA 350 Plus is a 230Vac, (115 and 240 Vac versions also available), compact 300W amplifier for HF broadband use (1.8-30 MHz), with a drive power of 1 – 12 W. It is equipped with six low-pass filters switched automatically by a microprocessor, or they can be switched manually using a front panel control. It features an illuminated LCD display showing the operating status of the amplifier. It also features two cooling fans, one located at the bottom and one at the top of the amplifier.
Supplied with AC Power cord.
The BLA 600 is a 230Vac amplifier, (configurable also for 115 and 240 Vac), The BLA600 is a 500W solid state linear amplifier compatible with all modern transceivers. It features automatic band selection. HF & 6m coverage, 3 antenna outputs that can be assigned by the user to one or more bands. This amplifier features an illuminated display that shows the operating status, and two cooling fans located in the front of the amplifier.
The MUA100 is a 100W wideband 12V compact linear amplifier for the UHF band (405-480 MHz). Ideal for low power portable transceivers, from 1 to 5W. It features automatic RTX switching (no PTT is required, however there is also a PTT input recommended for SSB use). The MUA is protected from excessive antenna SWR and equipped with a cooling fan.
The LA 144 is a 60W 12V linear amplifier for use in the VHF 135 – 175 MHz band, requiring an input power of 0.5 – 4 W maximum.
LA 145 is a 80W 12V linear amplifier for use in the VHF 135 – 175 MHz band, with an input power of 0.5 – 4 W maximum.
The LA 250 is a 200W 12V linear amplifier for use in the VHF 140 – 150 MHz, (2m), band, with an input power of 1 – 15 W. The LA 250 has an illuminated LCD display where all the parameters of the apparatus are indicated. It also features protection for excessive antenna VSWR, excessive input power and over temperature.
The LA 250 V is a 200W 12V linear amplifier for use in the VHF 140 – 150 MHz, (2m), band, with an input power of 1 – 15 W. The LA 250 V has an illuminated LCD display where all the parameters of the apparatus are indicated. It also features protection for excessive antenna VSWR, excessive input power and over temperature. The V model features two 120mm cooling fans attached to the heatsink.
The LA 251 is a 200W 12V linear amplifier for use in the VHF 150 – 160 MHz band, with an input power of 1 – 15 W. The LA 251 has an illuminated LCD display where all the parameters of the apparatus are indicated. It also features protection for excessive antenna VSWR, excessive input power and over temperature.
The KL 300 is a 12V linear amplifier for use in the HF frequency range, with a drive power of 1 to 10W in FM/AM mode, and 2.0 – 20W in SSB mode.
The KL 300 P is a 12V linear amplifier for use in the HF frequency range, with a drive power of 1 to 10W in FM/AM mode, and 2.0 – 20W in SSB mode. KL 300 P also features a 25dB preamplifier with electronic switching, which can be activated via a switch on the front panel.
The KL 405 is a 180Wmax 12V linear amplifier for use on the 10m Amateur Band, (or other HF bands with the use of a suitable Low Pass Filter). It requires a drive power of 1 to 10W in all modes. The KL 405 features a six position output power selector via a front panel control and a RX preamplifier with electronic switching, which can be activated via a switch on the front panel.
Showing 13–24 of 34 results